Teknatool Nova Mercury, Руководство по эксплуатации

Страница: 27 / 30

Mercury Accessories
Add On Bed Extension # 38012
Extend the bed of your Nova Mercury Woodlathe
for greater capacity for turning between centers. Each bed
unit adds 300 (12 in)
SuperNova Chuck
A next-generation, self-centering chuck to securely hold
round and square work pieces for centerless turning. The
special Tuff Lock gearing delivers amazing holding power in
both the contraction and expansion mode. It has an open-
back for easy cleaning and can be tightened one-handed with
an articulated key. It includes a screw chuck. A wide variety
of optional jaws are available to hold almost any work piece.
Revolving Center System # NCLS or # NLCS1
A multi-function live center system to expand your options
when turning between centers. It includes quick-change
tapers: a hollow cup center point, threaded center, cone
center, and an extension center. Made with three bearings
and precision machined for a high quality finish.
Outrigger Unit #38011
Extend the bowl turning capacity of the Nova Mercury
Woodlathe to around 10” in diameter. This unit is made from
cast iron, is easy to position and control, and mounts to the
headstock end of the lathe.
Collet Quill
# NCQS (pre Dec 02) # 29013 (post Dec 02)
The Collet Quill is a handy drill holder that screws onto your
Mercury Tailstock Quill (and Headstock spindle for post Dec
02 Mercury lathes).
It has two advantages over normal drill chucks:
1. Virtually no overhang. MT Drill Chucks take up
considerable bed length, which restricts drilling
options.
2. Better support for Drilling Point. Drill length can
be shortened so only the optimum drill length is
used for the drilling job. Without the Morse taper,
the drill tip is centred more accurately with less
tendency to wander.
Revolving
Center
System
SuperNova
Chuck
For further details about Teknatool's lathe accessories please contact your local
retailer for more information, or contact us directly. Visit our website at
www.teknatool.com.
8 27