Teknatool Nova Mercury, Руководство по эксплуатации

Страница: 18 / 30

Toolrest
1. To move the toolslide along the bed,
loosen the Camshaft Handle, move the
slide to the desired position, and
tighten the handle.
2. To adjust the toolrest, loosen the
Toolrest Lock Arm, position the
toolrest, and tighten the Lock Arm.
3. Adjust the toolrest close to the work
piece. Exact positioning may be varied
to suit the turner. Before turning,
revolve the stock by hand to make sure
it clears the rest. At intervals, stop the
lathe and readjust the toolrest.
!
Warning!
Lathe tools and chisels should
remain on the toolrest
whenever the tool is in contact
with the work piece.
Remove the toolrest when
sanding or polishing so fingers
do not get pinched.
18