Tekmar D 270 Скачать руководство пользователя страница 24

Technical Data

 

24 of 24

Product design, software and literature are Copyright © 2010 by:
tekmar Control Systems Ltd. and tekmar Control Systems, Inc.

All specifications are subject to change without notice.

Printed in Canada. D 270 - 08/10.

Limited Warranty 

The liability of tekmar under this warranty is limited. The 

Purchaser, by taking receipt of any tekmar product (“Product”), acknowl-
edges the terms of the Limited Warranty in effect at the time of such Product 
sale and acknowledges that it has read and understands same.

The tekmar Limited Warranty to the Purchaser on the Products sold hereunder 
is a manufacturer’s pass-through warranty which the Purchaser is authorized 
to pass through to its customers. Under the Limited Warranty, each tekmar 
Product is warranted against defects in workmanship and materials if the Prod-
uct is installed and used in compliance with tekmar’s instructions, ordinary 
wear and tear excepted. The pass-through warranty period is for a period of 
twenty-four (24) months from the production date if the Product is not installed 
during that period, or twelve (12) months from the documented date of installa-
tion if installed within twenty-four (24) months from the production date.

The liability of tekmar under the Limited Warranty shall be limited to, at tekmar’s 
sole discretion: the cost of parts and labor provided by tekmar to repair defects in 
materials and/or workmanship of the defective product; or to the exchange of the 
defective product for a warranty replacement product; or to the granting of credit 
limited to the original cost of the defective product, and such repair, exchange or 
credit shall be the sole remedy available from tekmar, and, without limiting the 
foregoing  in  any  way,  tekmar  is  not  responsible,  in  contract,  tort  or  strict  prod-
uct liability, for any other losses, costs, expenses, inconveniences, or damages, 
whether direct, indirect, special, secondary, incidental or consequential, arising 
from ownership or use of the product, or from defects in workmanship or materials, 
including any liability for fundamental breach of contract.

The pass-through Limited Warranty applies only to those defective Products 
returned to tekmar during the warranty period. This Limited Warranty does not 
cover the cost of the parts or labor to remove or transport the defective Product, or 
to reinstall the repaired or replacement Product, all such costs and expenses being 
subject to Purchaser’s agreement and warranty with its customers.

Any representations or warranties about the Products made by Purchaser to its 
customers which are different from or in excess of the tekmar Limited Warranty are 

the Purchaser’s sole responsibility and obligation. Purchaser shall indemnify and 
hold tekmar harmless from and against any and all claims, liabilities and damages 
of any kind or nature which arise out of or are related to any such representations 
or warranties by Purchaser to its customers.

The pass-through Limited Warranty does not apply if the returned Product has 
been damaged by negligence by persons other than tekmar, accident, fire, Act 
of God, abuse or misuse; or has been damaged by modifications, alterations or 
attachments  made  subsequent  to  purchase  which  have  not  been  authorized  by 
tekmar; or if the Product was not installed in compliance with tekmar’s instructions 
and/or the local codes and ordinances; or if due to defective installation of the 
Product; or if the Product was not used in compliance with tekmar’s instructions.

THIS WARRANTY IS IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR 
IMPLIED, WHICH THE GOVERNING LAW ALLOWS PARTIES TO CONTRACTU-
ALLY EXCLUDE, INCLUDING, WITHOUT LIMITATION, IMPLIED WARRANTIES 
OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, DURA-
BILITY OR DESCRIPTION OF THE PRODUCT, ITS NON-INFRINGEMENT OF 
ANY RELEVANT PATENTS OR TRADEMARKS, AND ITS COMPLIANCE WITH 
OR NON-VIOLATION OF ANY APPLICABLE ENVIRONMENTAL, HEALTH OR 
SAFETY LEGISLATION; THE TERM OF ANY OTHER WARRANTY NOT HEREBY 
CONTRACTUALLY EXCLUDED IS LIMITED SUCH THAT IT SHALL NOT EXTEND 
BEYOND  TWENTY-FOUR  (24)  MONTHS  FROM  THE  PRODUCTION  DATE,  TO 
THE EXTENT THAT SUCH LIMITATION IS ALLOWED BY THE GOVERNING 
LAW. 

Product Warranty Return Procedure

  All  Products  that  are  believed  to  have 

defects in workmanship or materials must be returned, together with a written 
description of the defect, to the tekmar Representative assigned to the territory in 
which such Product is located. If tekmar receives an inquiry from someone other 
than a tekmar Representative, including an inquiry from Purchaser (if not a tekmar 
Representative) or Purchaser’s customers, regarding a potential warranty claim, 
tekmar’s sole obligation shall be to provide the address and other contact informa-
tion regarding the appropriate Representative.

The installer must ensure that this control and its wiring are isolated and/or shielded from strong sources of electromagnetic noise. Conversely, this Class B digital apparatus 
complies with Part 15 of the FCC Rules and meets all requirements of the Canadian Interference-Causing Equipment Regulations. However, if this control does cause harmful 
interference to radio or television reception, which is determined by turning the control off and on, the user is encouraged to try to correct the interference by re-orientating 
or relocating the receiving antenna, relocating the receiver with respect to this control, and/or connecting the control to a different circuit from that to which the receiver is 
connected.

Cet appareil numérique de la classe B respecte toutes les exigences du Règlement sur le matériel brouilleur du Canada.

Caution 

The nonmetallic enclosure does not provide grounding between conduit connections. Use grounding type bushings and jumper wires.

Attention 

Un boîtier nonmétallique n´assure pas la continuité électrique des conduits. Utiliser des manchons ou des fils de accord spécialement conçus pour la mise 

á la terre.

Control Systems

tekmar Control Systems Ltd., Canada
tekmar Control Systems, Inc., U.S.A.

Head Office: 5100 Silver Star Road
Vernon, B.C. Canada V1B 3K4
(250) 545-7749  Fax. (250) 545-0650
Web Site: www.tekmarcontrols.com

Limited Warranty and Product Return Procedure

Boiler Control 270 

One Modulating Boiler & DHW

Literature 

—  D 270, A 270, D 001, D 070.

Control 

—  Microprocessor PID control; This is 

not a safety (limit) control

.

Packaged weight 

—  3.3 lb. (1500 g), Enclosure A, blue modified PVC plastic

Dimensions 

—  6-5/8” H x 7-9/16” W x 2-13/16” D (170 x 193 x 72 mm)

Approvals 

—  CSA C US, meets ICES & FCC regulations for EMI/RFI.

Ambient conditions 

—  Indoor use only, 32 to 104°F (0 to 40°C), < 90% RH non-condensing.

Power supply 

—  115 V (ac) ±10% 50/60 Hz 600 VA

Relay capacity 

—  230 V (ac) 5 A 1/3 hp pilot duty 240 VA 

Modulation Output 

—  0 – 10 V (dc)

Demands 

—  20 to 260 V (ac) 2 VA

Sensors included 

—  NTC thermistor, 10 k  @ 77°F (25°C ±0.2°C) ß=3892

 

 

 

Outdoor Sensor 070 and Universal Sensor 082

Optional devices

 

—  Indoor Sensor 076/077

1

Boil

Dem

2

Com
Dem

3

DHW

Dem

Prim

P1

4 5

N

L

6

Power

7 8

9 10

11

+

--

12 13 14 15 16 17 18

Mod V(dc)

Out Com Indr

UnO Boil

Com

Sw

Boiler Control 270

One Modulating Boiler & DHW

Boiler

Pmp P2

DHW

Pmp/Vlv

H2039A

Menu

Item

Boiler Demand
DHW Demand
Modulation
DHW Priority Override

Test

off 

not testing

red 

testing

red 

testing paused

Made in Canada by

tekmar Control Systems Ltd.

tektra 969-03

Power 

115 V ±10% 50/60 Hz 600 VA

Relays 

230 V (ac) 5 A 1/3 hp, pilot duty 240 VA

Demands 

20 to 260 V (ac) 2 VA 

Signal wiring must be rated at least 300 V. 

For maximum heat
press & hold 

Test

button for 3 seconds.

Meets Class B:
Canadian ICES
FCC Part 15

D

at

e C

od

e

Advanced

Off

Installer

Exercise

Do not apply power

Содержание D 270

























Отзывы: