60
Power Management function
(depending on model)
Some models are equipped with a power limiting
function (Power Management). This function
allows the total power generated by the hob to be
set to different values selected by the user. To do
this, for the first minute after having connected the
hob to the power supply, it is possible to access
the power limiting menu.
1
Press the
(11) touch key for three seconds.
The letter
PL
will appear on the timer indicator
(12).
2
Press the looking touch key
(6). The different
power values to which the hob can be limited will
appear and these can be changed using the
(11) and
(10) sensors.
3
Once the value has been selected, once again
press the looking touch key
(6). The hob will
be limited to the chosen power value.
If you want to change the value again, you must
unplug the hob and plug it in again after a few
seconds. Thus you will again be able to enter the
power limiting menu.
Every time the power level of a hotplate is
changed, the power limiter will calculate the total
power the hob is generating. If you have reached
the total power limit, the touch control will not allow
you to increase the power level of that hotplate.
The hob will beep and the power indicator (3) will
blink at the level that cannot be exceeded. If you
wish to exceed that value, you must lower the
power of the other hotplates. Sometimes it will not
be enough to lower another by a single level as
this depends on the power of each hotplate and
the level it is set at. It is possible that to raise the
level of a large hotplate that of several smaller
ones must be turned down.
If you use the quick switch-on at maximum power
function and the said value is above the value set
by the limit, the hotplate will be set to the
maximum possible level. The hob will beep and
the said power value will blink twice on the
indicator (3).
Safety switch off function
If due to an error one or several heating zones do not
switch off, the appliance will be automatically
disconnected after a set amount of time (
see table 1
).
When the “safety switch off” function has been
triggered, a
0
is displayed if the glass surface
temperature is not dangerous for the user or an
H
if there is a burn risk.
Keep the control panel of the heating
areas clean and dry at all times.
In the event of operating problems or
incidents not mentioned in this manual,
disconnect the appliance and contact the
technical service
USE
Select
power level
MAXIMUM OPERATION TIME
(in hours)
0
0
1
8
2
8
3
5
4
4
5
4
6
3
7
2
8
2
9
1
P
10 or 5 minutes, readjust to level 9
(depending on model)
Table 1
Содержание JZC 63312 A
