Teka JZC 63312 A, Руководство пользователя

Страница: 57 / 160

57
USE
The manoeuvres are done by means of the touch
keys. You do not need to exert force on the
desired touch key, you only need to touch it with
your fingertip to activate the required function.
Each action is verified by a beep.
Use the cursor slider (2) to ajust power levels (0 -
9) by sliding your finger over it. Sliding towards the
right increases the value, whereas sliding towards
the left decreases it.
It’s also possible to directly select a power level by
placing your finger directly on a desired point of
the cursor slider (2).
In order to select a plate on these models,
directly touch the cursor slider (2).
SWITCHING ON THE DEVICE
1
Touch the On touch key (1) for at least one
second. The touch control will become active, a
beep will be heard and the indicators (3) will light
up displaying a “-”. If any cooking area is hot, the
related indicator will flash an
H and “-”.
If you do not take any action in the next 10
seconds the touch control will switch off
automatically.
When the touch control is activated, you can
disconnect it at any time by touching the touch
button
(1), even if it has been locked (lock func-
tion activated). The touch button (1) always
has priority to disconnect the touch control.
ACTIVATING PLATES
Once the touch control is activated with sensor
(1), any plate can be turned on by following these
steps:
1 Slide the finger or touch in any position of one of
the cursors “slider” (2). The zone has been
selected and simultaneously the power level will
be set between 0 and 9. That power value will be
shown on the corresponding power indicator and
its decimal dot (4) will keep light up during 10
seconds.
2 Use the cursor slider (2) to choose a new
cooking level between 0 and 9.
As long as the plate is selected, in other words,
with the decimal (4) dot light up, its power level
can be modified.
TURNING OFF A PLATE
Using the touch slider key (2) lower the power to
level 0. The hotplate will switch off.
When a hot plate is switched off an H will appear
in its power indicator (3), if the glass surface of the
related cooking area is hot and there is a risk of
burns. When the temperature drops, the indicator
(3) switches off (if the hob is disconnected), or
otherwise a “-” will light up if the hob is still
connected.
TURNING ALL PLATES OFF
All plates can be simultaneously disconnected by
using the general on/off sensor
(1). All plate
indicators (3) will turn off. If the heating zone
turned off is hot, its indicator shows an
H .
Pan detector
Induction cooking zones have a built-in pan
detector. This way, the plate will stop working if
there is no pan present or if the pan is not suitable.
The power indicator (3) will show a symbol to
designate "there is no pan"
if, while the zone is
on, no pan is detected or the pan is not suitable.
If a pan is taken off the zone while it is running, the
plate will automatically stop supplying energy and
it will show the symbol for "there is no pan". When
a pan is once again placed on the cooking zone,
energy supply will resume at the same power level
previously selected.