Teka JZC 63312 A, Руководство пользователя

Страница: 52 / 160

52
Every time the power level of a hotplate is
changed, the power limiter will calculate the total
power the hob is generating. If you have reached
the total power limit, the touch control will not allow
you to increase the power level of that hotplate.
The hob will beep and the power indicator (3) will
blink at the level that cannot be exceeded. If you
wish to exceed that value, you must lower the
power of the other hotplates. Sometimes it will not
be enough to lower another by a single level as
this depends on the power of each hotplate and
the level it is set at. It is possible that to raise the
level of a large hotplate that of several smaller
ones must be turned down.
If you use the quick switch-on at maximum power
function and the said value is above the value set
by the limit, the hotplate will be set to the
maximum possible level. The hob will beep and
the said power value will blink twice on the
indicator (3).
Special functions: CHEF
(depending on the model)
The Touch Control has special features that help
the user to cook through the CHEF sensor
(8). These functions are available depending on
the model.
To activate a special feature on a zone:
1
First it should be selected; and then, the decimal
point (4) will be active on the power indicator (3).
2
Now click on the CHEF sensor (8). The
sequentially successive presses will go over all
the CHEF functions available in each zone one
by one. These functions will show the activation
with the corresponding leds (13), (14), (15).
If you want to cancel a special active function at
any time, you should touch the “slider” cursor
sensor (2) in the position “
0
”.
KEEP WARM FUNCTION
This function automatically sets an appropriate
power level to keep the cooked food hot.
To activate it, select the plate, and press on the
CHEF sensor
(8) until the led (15) located on
the icon lights up. Once the function is
activated, the symbol will appear on the
power indicator (3).
You can override the function at any time by
turning off the plate, by changing the power level
or by choosing a different special function.
MELTING FUNCTION
This function maintains a low temperature in the
cooking zone. Ideal for defrosting food or for
slowly melting other food types as chocolate,
butter, etc.
To activate it, select the plate, and press on the
CHEF sensor
(8) until the led (14) located on
the icon lights up. Once the function is
activated, the symbol will appear on the
power indicator (3).
You can override the function at any time by
turning off the plate, by changing the power level
or by choosing a different special function.
SIMMERING FUNCTION
This function allows you to keep simmered.
After the food is boiled, enable the plate by
selecting it, and press the CHEF sensor
(8)
until the led (13) located on the icon lights up.
Once the function is activated, the symbol will
appear on the power indicator (3).
You can override the function at any time by
turning off the plate, by changing the power level
or by choosing a different special function.
Safety switch off function
If due to an error one or several heating zones do not
switch off, the appliance will be automatically
disconnected after a set amount of time (
see table 1 ).
When the “safety switch off” function has been
triggered, a
0 is displayed if the glass surface
temperature is not dangerous for the user or an H
if there is a burn risk.
Keep the control panel of the heating
areas clean and dry at all times.
In the event of operating problems or
incidents not mentioned in this manual,
disconnect the appliance and contact the
technical service.
USE