Operation
GB
29
Keep-warm function
With the keep-warm function you can use one of the cooking zones to
keep food warm. The respective cooking zone is operated at a low power
level.
1. Cookware is placed on a cooking zone and a power level (e.g. 3) is
selected.
2. Pressing the
sensor field
or moving your finger over it will
reduce the power level. Stop at ; the keep-warm function has been
activated.
3. Press the
sensor field
on the left to switch it off.
The keep-warm function is available for 120 minutes, after which the hob will
be switched off.
Power boost setting
(cooking zones marked with a P)
The power boost setting makes additional power available for induction cook-
ing zones. A large quantity of water can be brought to the boil very quickly.
The power boost operates for 10 minutes and then the cooking zone will
automatically be switched down to power level 9 (only cooking zones with a
3 kW output, see “Technical data”).
1. Switch on the hob. To select a cooking zone, press the
power level dis-
play (as a key).
The stand-by dot of the cooking zone selected must light
up.
2. Press the
power key
once in order to activate the power boost set-
ting. The power display will show a P.
3. After 10 minutes the power boost setting will switch off automatically. The
P will go off and the cooking zone will switch down to power level 9 (only
cooking zones with a 3 kW output, see „Technical data”).
Note:
In order to prematurely de-activate the power boost, press the
power key
.
Power management
For technical reasons two cooking zones always comprise a module and
have a maximum power level.
If this power range is exceeded when a higher power setting level or the
power boost function is switched on the power management system will
reduce the power setting of the corresponding cooking zone of the module.
The display for this cooking zone will initially blink, after which the highest-
possible power setting will be consistently displayed.
stand-by dot
Modules (power management)
