Operation
GB
25
Operating the keys
The controls described here expect the pressing of a (selection) key
to be
followed
by the pressing of a subsequent key.
The next key will need to be pressed
within 10 seconds
, otherwise the
selection will be deleted.
Switching on the hob and cooking zones
1.
Press the ON/OFF key
(approx. 1 sec.) until the power setting 0
appears and a short signal will sound. The stand-by dots will blink. The
controls are ready for operation.
2. To select a cooking zone, press the
power level display (as a key).
The
stand-by dot of the cooking zone selected will light up.
3. The
sensor field
must be activated immediately afterwards. A
power setting will be switched on.
........ Left .........................Power level 0
........ Middle ....................Power level 5
........ Right ......................Power level 9
See the section on „Worth knowing about the slider (sensor field)”
Select the respective cooking zone and then press the
sensor field
to change a power setting or to switch on an additional cook-
ing zone.
Important: The corresponding stand-by dot must light up!
4. Immediately put
cookware suitable for induction cooking
onto the
cooking zone. The pan recognition device will activate the induction coil.
The pot or pan will be heated up.
As long as no metal cooking pot is placed onto the cooking zone, the dis-
play will alternate between the power level set and the symbol .
If no pot is placed on the cooking zone it will switch off after 10 minutes
for reasons of safety. Please refer to the Section on “pan recognition”.
Switching off a cooking zone
5. To select a cooking zone, press the
power level display (as a key).
The
stand-by dot of the cooking zone selected must light up.
6. a) Press the
sensor field
on the far right (0) or
6. b) move the finger you have placed on the
sensor field
to
the
left to reduce the power setting to 0 or
6. c) Press the
ON/OFF key
. The entire hob will be switched off (all of
the cooking zones are switched off).
Switching off the hob
7. Press the
ON/OFF key
. The hob will be completely switched off,
irrespective of any settings.
Note:
The hob will switch off automatically after 10 seconds when all the cooking
zones are switched of manually (power setting 0) and no key/sensor field is
pressed afterwards.
suitable for induction cooking
stand-by dot
lights up
stand-by dot
