BA_ECO-Cube_190815_EN.docx
21
15.08.2019
7.6 Changing the filter mat of the control housing
The filter mat of the control housing (pos. 8) must be regularly
inspected and changed if necessary. This check depends on the
level of pollution. The filter mat is in the air grating.
We recommend promptly stocking up on filter mats (see spare
part list).
Figure: filter mat
8
Operating the system
Caution
Programme setting options, menus, etc. Please refer to the separately attached operating instruc-
tions of the system control.
The supplied step ladder must be used to reach the control
elements (pos. 13). Keep the step ladder on getting close to
the filter system.
The step ladder only is allowed to be used
on even, solid and nonslipped underfloors. The maxi-
mum total load of 150 kg (330 lb) is not allowed to be
exceeded.
The step ladder may only be used to reach the control
elements
- but not for other purposes.
9
Dismantling/disposal
The dismantling of the installation also entails the possibility of electric shock
or breathing hazards. Likewise, there may be bruising and injury during the
dismantling work.
Before disassembling, the machine must be disconnected from the mains and the ex-
ternal compressed air supply. Only authorised personnel may disassemble the ma-
chine. Respiratory protection and protective clothing must be used during all the work.
The operator is obliged to store and dispose of the accumulated dust in accordance with
national or regional regulations.
In order to ensure you a trouble-free operation of your filter system as well as proper disposal of
the deposited dust, we offer the following services:
•
A maintenance and repair contract
•
telephone customer service
Talk with our service department.
Tel: +49 28 63 - 92 82 – 0
Fax: +49 28 63 - 92 82 - 72
