Teikoku DynaPump LE Series, Инструкция по эксплуатации

Страница: 25 / 31

CHEMPUMP
MIDWEST SERVICE CENTER
STATE ROUTE 2
BELMONT, WV 26134
PHONE: (304) 684-2459
FAX: (304) 684-7593 TEXAS PROCESS EQUIPMENT
5880 BINGLE ROAD
HOUSTON, TX 77092
PHONE: (713) 460-5555
FAX: (713) 460-4807
CUSTOMER ______________________________________ DATE: _______________________________
ADDRESS: ____________________________________ PHONE: ______________________________
____________________________________ FAX: ________________________________
CONTACT: ____________________________________ RMA #: ______________________________
Please complete the items below. Providing this information will allow us to work as quickly and safely as possible.
PUMP MODEL: ___________________________________ SERIAL NUMBER: _______________________
PART NUMBER :___________________________________ DATE INSTALLED: _______________________
DATE PURCHASED: _______________________________ INDOOR / OUTDOOR:_ ___________________
REASON FOR RETURN: WARRANTY REQUEST FACTORY SERVICE
FAILURE INFORMATION:
Failure To Deliver Required Capacity Vibration Motor Burnout
Loses Prime After Starting Bearing Failure Other: ______________________
Axial Wear Due To Thrust Insufficient Pressure
BRIEF DESCRIPTION OF PUMP FAILURE: ____________________________________________________________
_
___________________________________________________________________________________________
____________________________________________________________________________________________
DECONTAMINATION INFORMATION
All pumps/parts must be completely decontaminated and all information in this section must be completed
prior to shipment to our factory or service center. Shipments received without this documentation will not be
accepted and will be returned to the point of shipment.
CHECK ONE OF THE FOLLOWING:
The pump has been flushed by following steps A through Both the complete pump and the stator assembly have
A3 of the Chempump Flushing Procedure on page 2 of been flushed by following steps A through B3 of the
this form. No liner rupture is suspected. Chempump Flushing Procedure on page 2 of this form.
The motor must be rewound.
FLUID PUMPED: __________________________ WHAT FLUID DID YOU FLUSH WITH: ______________
Attach completed material safety data sheets (MSDS) for these fluids. If either fluid is proprietary, please
attach a description of any characteristics that will assist Chempump in safe handling. Without detailed and complete
information on the pumped fluid, we will not be able to process your order.
PROTECTION EQUIPMENT RECOMMENDED FOR SAFE HANDLING OF THE PROCESS FLUID: ____________
_____________________________________________________________________________
DECONTAMINATION CERTIFIED BY: _____________________________ DATE:_______________________
TITLE: ______________________________________________________ PHONE: _____________________
RETURN COMPLETED FORM AND PUMP/PART TO:
CHEMPUMP
FACTORY SERVICE CENTER
959 MEARNS ROAD
WARMINSTER, PA 18974
PHONE: (215) 343-6000
FAX: (267) 486-1037
DECONTAMINATION CERTIFICATION
AND FLUSHING PROCEDURE
Page A-2