TEFAL DV8610M1, Руководство пользователя

Страница: 12 / 53

10 9
IS THERE A PROBLEM ?
Problems Possible causes Solutions
There is no steam.
The steamer is not plugged
in. Check that your appliance is
correctly plugged in.
The water level is too low. Remove tank and refill it.
The steam button trigger
has not been primed. Press the steam button trigger
successively for a few seconds to
begin steaming.
You use the appliance for
the first time. When the appliance is new, press
the steam button trigger a few
times.
The water tank is not in
place. Ensure that the water tank snaps in
when put into place (full lock).
Plug in your appliance.
The appliance is not hot
enough. Adjust temperature dial and wait for
stable temperature.
The appliance is jammed
by calc. Apply "Maintenance descaling
procedure".
The appliance does
not heat. It is not plugged in. Allow your steam brush to heat for
approximately 60 seconds before
using.
Water leaks or spits. The water tank is not in
place. Ensure that the temperature dial is
at 3 dots or more.
Your appliance is not hot
enough. Wait for 60 seconds so that the
appliance is ready to steam.
The steam leaves
stains on the fabric. You are using water with
additives. Never add any product additives in
the water tank.
Warning: never forget to unplug the steam brush and empty the water in horizontal
position after your ironing session. While not in use, you can hang your steambrush by
its hook. Wait for an hour before hanging.
Please note that water can come out of the inlet cover if you hanging it vertically.