51
98-05304-EN R2
Aeros 9040 field computer
HOME
SE
TUP
GUID
ANCE
FULL SCREEN
INTR
ODUC
TION
GNSS
RA
TE C
ONTR
OL
APPENDIX
IMPLEMENT
Figure 6-12: Multiple sections with ISOBUS Sprayer
Figure 6-13: Overlap
100%
50%
0%
Spreader – TeeJet
A virtual line is created in line with the delivery disks from which
the application section or sections can vary in length and can be at
different distances from the line (availability depends on the specific
equipment in the system).
Single section
No section control is available on the system.
1. Select
Spreader
implement type on Implement screen.
2. Press Implement type NEXT PAGE arrow
.
3. Select from:
►Setup type – used to select
TeeJet
spreader type
►Antenna to disks in-line offset distance
– measured in
parallel to the centreline of the machine, defines the in-line
distance from the GNSS antenna to the disks, or dispersal
mechanism
►Implement lateral offset direction
– defines the lateral
direction, either left or right, from the centreline of the machine
to the centre of the implement while facing in the machine's
forward direction
►Implement lateral offset distance
– defines the lateral
distance from the centreline of the machine to the centre of
the implement
►Spread offset distance
– used to set the distance between
the disks or dispersal mechanism and where product initially
hits the ground for the section
►Spread length
– used to set the length of application for
the section
4. Press RETURN arrow
to return to the Implement screen
or CONFIGURATION side tab
to return to the main
Configuration screen.
Содержание AEROS 9040
Страница 1: ...Software version 4 31 U S E R M A N U A L AEROS 9040...
Страница 116: ......