TECNOMOTOR 810, Руководство пользователя, Страница: 57 / 368

3
WARNINGS
All rights reserved. No part of this instruction manual may be reproduced
or transmitted by any means, electronic or mechanical, including
photocopying, recording or other storage and retrieval system for any
purpose other than the purchaser's personal use, without the express
written permission of the Manufacturer.
This documentation is expressly intended for qualified operators, therefore
some information easily inferred from reading the texts and examining the
drawings has not been further specified.
The Manufacturer is not responsible for the consequences resulting from
incorrect operations carried out by the user.
The data and information contained in this manual may be subject to changes
or updates, without further notice or obligation by the Manufacturer.
Graphic symbols used in the manual
This symbol is used to warn the user about very important
information regarding operations for use and safety.
This symbol is used to draw the attention of the operator to
where important information and suggestions
are provided for
the proper operation of the instrument.
This symbol is used to warn the user about very important
instructions for maintenance operations on electric parts.
This symbol is used to warn the user about very important
instructions for maintenance operations on mechanical parts.