Tecnoma VECTIS 1000 Скачать руководство пользователя страница 103

Страница: 103 / 133

May-2015

103

Chapter 6

6 - MACHINE MAINTENANCE

• A regular and appropriate maintenance will keep your sprayer in excellent working condition

for a long time and avoid premature wear.

• A regular and correctly performed maintenance is part of the guarantee conditions.

•

Specific and specialist know how is required to carry out

maintenance works. These mainte-

nance instructions do not aim to transfer this knowledge !

→ Please get in touch with your authorised dealer.

• Comply with current legislation on environmental protection,

◊

when eliminating consumables as well as parts that have come in contact with

these products (oils, greases, etc.)

◊

during maintenance and cleaning operations.

During machine maintenance, repair or cleaning, comply with the safety instructions provided

in paragraph "

CLEANING, MAINTENANCE AND REPAIR

" of chapter

GENERAL SAFETY

Compliance with these instructions is important for your safety.

WARNING

Danger of accidents due to crushing, shearing, cutting, wrenching, getting run over,

tearing, catching and electrocution in the following instances :

• Accidental lowering of the raised machine via the hydraulic three point coupling circuit

of the tractor.

•

Accidental lowering of raised and non-fixed elements of the

machine.

• Accidental starting and movement of the tractor and machine assembly.

Immobilise the tractor and the machine in order to avoid any accidental start up or movement,

before carrying out cleaning, maintenance and repair operations.
• Place the

machine on hard, flat and horizontal ground.

• Turn off the tractor engine, remove the key from the ignition or unhitch the machine lower the

stand and lock it in place.

• Tighten the parking brake if the machine is equipped with that option or apply chocks to the

wheels.

WARNING

Risk of accident due to capsizing or crushing !

• Never open the boom when the sprayer is empty or

not hitched to the tractor

• If the work has to be carried out with the booms ex-

tended take care to close the lifting - lowering hydrau-

lic stop valve (see boom maintenance manual)

Содержание VECTIS 1000






































































































































Результаты поиска

Содержание VECTIS 1000

Отзывы:

Похожие инструкции для VECTIS 1000

Бренды по названию

Популярные бренды

Tecnoma VECTIS 1000, Настройки, использование и обслуживание

Результаты поиска

Содержание VECTIS 1000

Отзывы:

Похожие инструкции для VECTIS 1000

Бренды по названию

Популярные бренды