Tecnoma VECTIS 1000 Скачать руководство пользователя страница 31

Страница: 31 / 133

MAy-2015

– DECRIPTION OF THE MACHINE –

4.4 - TECHNICAL CHARACTERISTICS

NOTE

The dimensions and weight are provided by way of example, and may vary depending on your

machine's equipment (boom, tyres, tank capacity, options)!

4.4.1 - BRAKING

In reference to the amended order of 18 August 1955, the Vectis model does not have to have a braking

installation.

IMPORTANT

The amended order of 18 August 1955 indicates

that all machines and towed agricultural implements

with the sum of the technically permissible masses

per axle

≤ 3.5 tonnes

are dispensed from having to

have braking installations and must be fitted with a

second hitching device in case of separation of the

hitch

The second hitching device must take the form of a

cable sling (C).

Fig.4

WARNING

Risk of an accident following separation of the machine from the tractor!

• Systematically secure the hitch by attaching the safety cable to the tractor such that it does not

obstruct the universal joint shaft.

• Make sure that the cable sling and its attachments are in good condition.

4.4.2 - SPRAYER WEIGHT

DANGER

Payload = PTAC - empty weight

• Do not exceed the authorised payload
• Risk of an accident in the event of unstable driving situations
•

Depending on the density of the products used, not all of the sprayers allow the tank to be filled

completely

DANGER

Risk that the machine could tip over!

With certain machine configurations, in the following cases:

• Empty tanks
• Boom deployed
• Unit uncoupled

Содержание VECTIS 1000






































































































































Результаты поиска

Содержание VECTIS 1000

Отзывы:

Похожие инструкции для VECTIS 1000

Бренды по названию

Популярные бренды

Tecnoma VECTIS 1000, Настройки, использование и обслуживание

Результаты поиска

Содержание VECTIS 1000

Отзывы:

Похожие инструкции для VECTIS 1000

Бренды по названию

Популярные бренды