AutoGRAPH ON-BOARD CONTROLLER • USER MANUAL
53
TechnoKom © 2016
RS-485 Bus of the controller has to be customized to interact with fuel level sensors. It can be
performed by means of the AG.GSMConf configuration program and control commands via the
data server or a SMS.
i
NOTE
Connection of AutoGRAPH-CardReader-SMART to RS-485 Bus
The AutoGRAPH-CardReader-SMART is designed to read RFID and SIM cards. The ID
(identification number) of inserted card is transmitted to AutoGRAPH controller via RS-485
bus. Up to 250 IDs can be stored in the flash memory of the AutoGRAPH-CardReader-
SMART. Each card can customize outputs of the card reader when connecting.
For more information on connection and configuration of the tracker for operation with the
AutoGRAPH-CardReader-SMART via RS-485 bus see document «User Manual. AutoGRAPH-
CardReader-SMART» .
i
NOTE
RS-485-1 «A» (20)
ORANGE with WHITE STRIPE
RS-485-1 «B» (17)
BROWN with WHITE STRIPE
VEHICLE SYSTEM VOLTAGE (+)
AutoGRAPH-CardReader
SMART
TKLS fuel level sensor conforms to European regulatory documents, requirements and standards.
Technical characteristics and full list of certificates and licences of the TKLS sensor, see on official
web site www.tkls.eu.
i
NOTE