TechnoKom AUTOGRAPH, Руководство пользователя

Страница: 15 / 68

AutoGRAPH ON-BOARD CONTROLLER • USER MANUAL
15
TechnoKom © 2016
Interface Connectors
Variant 1
Variant 1 of the interface connectors is applicable for AutoGRAPH-GSM controllers.
Set of interface connectors may vary depending on the AutoGRAPH controller functionality.
Power supply connector
4-pin 1-Wire / Output 2 / Inputs 3-4 connector
6-pin CAN / RS-485 / Inputs 7-8 connector
№ Colour of a wire in a cable Assignment
1
Red (long) + Vin
2 Black -Vin
3 Yellow Digital input 1 (active low)
4 Green Analogue input 1 (0…10 V) / Digital input 5 (active high)
5 Red (short) + Backup supply voltage
6
Gray Open collector output 1 (0.5 А)
7 White Digital input 2 (active low)
8 Brown Analogue input 2 (0…24 V) / Digital input 6 (active high)
№ Colour of a wire in a cable Assignment
10 Blue Digital input 3 (active low)
11 Orange Open collector output 2 (0.5 А)
13 Blue with a white stripe Digital input 4 (active low)
14 Pink 1-Wire
№ Colour of a wire in a cable Assignment
15 Green with a white stripe CAN (H)
16
Black with a white stripe Digital input 7 (active high)
17 Brown with a white stripe 1: RS-485 (B)
18 Yellow with a white stripe CAN (L)
19
Red with a white stripe Digital input 8 (active high)
20 Orange with a white stripe 1: RS-485 (A)