AutoGRAPH ON-BOARD CONTROLLER • USER MANUAL
33
TechnoKom © 2016
Installation of MicroSD Card
The AutoGRAPH-GSM controller is equipped with a slot for microSD card located on the
upper side of the PCB. The microSD card is used to store photos from cameras connected
to the tracker and logs of operation. The tracker supports installation of microSD cards with
maximum capacity of 32GB.
AutoGRAPH controllers of other modifications are equipped with internal eMMC memory to
store photos and operation logs.
To insert microSD card:
•
Unscrew the four fastening screws and remove the back cover of the tracker.
•
Insert a microSD card in the slot with the card’s contacts facing the PCB (see fig.1).
•
When the microSD card is inserted, place the back cover back and tighten the four
fastening screws.
To remove the microSD card, gently push the card’s external edge and release it. Then
remove the card.
