TechniSat TECHNIMAX AS1, Инструкция по эксплуатации

Страница: 37 / 124

37
DE
EN
FR
IT
NL
PL
Switch the device off after each area has been cleaned. This will significantly
increase the operating time per battery charge. Recharge the battery after
use.
> Select the accessories as required and attach them to the device.
> Switch the device on by pressing the operating switch (8) once. The device
immediately starts the suction process. The touch display (1) lights up.
> If necessary, the suction strength can be changed manually via the touch
display by touching the “Suction strength” field. The intelligent suction control
can also be set by touching the AUTO symbol.
> Move the device over the area to be cleaned.
> If you want to switch the device off again, press the control switch once
more.
8.1 Emptying the dust holder
Remove the dust holder from the motor unit to facilitate emptying.
> Hold the dust holder over an open bin. The distance to the bin should be as
small as possible so that the dust is not dispersed into the surroundings.
> Press the emptying button (5) on the dust holder. The lid of the dust holder
opens and the dirt falls out.
> Press the lid onto the dust holder to close it. The tab must engage audibly.