TechniSat MultyMedia TS 1, Руководство по эксплуатации

Страница: 13 / 91

You can interrupt the initial installation by pressing the red
function key in the starting window of the installation assi-
stant. In the following steps of the installation, you can then
confirm the settings made by pressing the
green function
key; you will then be taken to the next step of the installation
procedure. If you press the
red function key you will be
taken to the previous step of the installation, thus giving you
an opportunity to correct errors at any time.
If the initial installation is not performed, or if it is aborted, the
receiver will commence operation with a standard pre-pro-
grammed procedure.
The initial installation process shown here ser-
ves merely as an example.
The exact process of the
initial installation will depend on the settings you select.
Please therefore follow all instructions displayed on screen
carefully.
Operating language
> When starting the installation assistant, the first selec-
tion window to be displayed will be that for the
Operating language . (Fig. 5-1)
> Use the arrow keys up/down to mark the desired
operating (menu) language.
Your selection will automatically be taken over for the
setting of your preferred audio language.
> Confirm by pressing the green function key Accept .
Country setting
> Use the arrow keys to select the country in which
you are located.
The selection made here will result in the time zone
being set, and will affect the sorting of the programme
list.
(Fig. 5-2)
> Confirm by pressing the green function key Accept
to accept the selection.
Selecting reception signals
> Use the arrow keys up/down to mark the line showing
the signal yource you wish to activate resp. de-activa-
te.
(Fig. 5-3)
> Use the arrow keys left/right to activate ( Yes )
resp. deactivate ( No ) the marked signal source.
> Confirm your selection by pressing the green func-
tion key.
13
(Fig. 5-1)
(Fig. 5-2)
(Fig. 5-3)
BED_AN_Multymedia_TS1 2Q4eng 29.03.2006 10:41 Uhr Seite 13