TechniSat MultyMedia TS 1, Руководство по эксплуатации, Страница: 66 / 91

8.7 Encryption system
Under this menu item you can go to the sub-menues of the
CONAX Smartcard and of the CI module. By confirming the
Smartcard or the CI module with
OK , you can see informa-
tion on the CI module used resp. on the Smartcard inserted.
Manual initialising of CI module
> Press the green function key CI Reset to initialise
the CI module manually.
9 Use with a motor antenna (DiSEqC 1.2)
Your digital receiver is ready for use with a motorised rotating
antenna. Using the DiSEqC control (DiSEqC level 1.2) you
have the facility to control a suitable motor via the co-axial
cable.
> Use the Menu key to call up the Main Menu .
> Use the arrow keys up/down to mark the line
Settings .
> Confirm by pressing OK .
The menu Settings will be displayed.
> Now use the arrow keys up/down to mark the line
Antenna settings (DVB-S) .
> Confirm by pressing OK . The menu Antenna set-
tings (DVB-S) will be displayed. (Fig. 9-1)
> Use the arrow keys left/righ t to switch the
DiSEqC control to on .
> Now use the arrow keys up/down to select the
DiSEqC position (e.g. A/B 3) to which you wish to
allocate the motor antenna.
> Press the OK key to open a window allowing you to
select the Satellite resp. the Motor antenna .
(Fig. 9-2)
> Use the arrow keys up/down to select the line
Motor antenna and confirm by pressing OK .
> A note regarding the setting of East and West limits
will be displayed.
(Fig. 9-3) . Confirm by pressing OK
9.1 East and West limits
To avoid mechanical damage to the satellite dish or the LNB
by physical obstacles, you must first set the maximum degree
of rotation to both East and West. If there are any obstacles
in the rotating field of the dish (e.g. a wall or chimney), these
must definitely be considered when setting the East-West
limits.
66
(Fig. 9-1)
(Fig. 9-2)
(Fig. 9-3)
BED_AN_Multymedia_TS1 2Q4eng 29.03.2006 10:41 Uhr Seite 66