29
>
Press the
green
function key (Search mode) to decide
whether you want to search only for free-to-air
programmes (
Free programmes
), or whether you
want to include encrypted programmes (
All
programmes
).
>
Confirm by pressing the
red
function key (“Start
search”).
The search will be started. Please note any
information displayed on your screen.
>
Pressing the
red
function key again will stop the
search procedure.
A full search can take approximately 15 minutes to complete.
Please also note any information displayed on your screen.
7.4.2 Transponder
This menu item allows you to search a specific transponder
(see Point 9 Technical terms) for programmes. To do this you
will have to enter the appropriate transponder data.
>
Use the
arrow keys up/down
to select the menu item.
>
Confirm by pressing
OK
. The menu
Search
Transponder
will be displayed.
(Fig. 7-10)
Satellite
In this line, set the satellite on which the desired transponder
is located.
>
Use the
arrow keys up/down
to mark the line
Satellite
.
>
Press
OK.
A table showing the active satellites will be
displayed.
>
Use the
arrow keys up/down
to mark the desired
satellite.
>
Confirm by pressing
OK
.
The selected satellite will now be displayed in the line
Satellite.
Transponder frequency
>
Use the
arrow keys up/down
to mark the line
Transponder frequency.
>
Using the
numeric keys
, enter the desired frequency
in this line.
Symbol rate
The symbol rate indicates the volume of data transmitted per
second. This value can be, for example, 27500 (27500
symbols per second).
>
Use the
arrow keys up/down
to mark the item
Symbol rate.
>
Use the
numeric keys
to enter the appropriate symbol
rate.
(Fig. 7-10)
bed_anl_DIGITY CI_Quark3_en.qxd 31.01.03 16:47 Seite 29
