TechnipFMC Smith Meter AccuLoad IV Скачать руководство пользователя страница 6

Страница: 6 / 72

AccuLoad IV Installation & Maintenance Manual

Introduction

1 Introduction

This manual provides guidance for the electrical installation and general maintenance of the Smith Meter

AccuLoad IV. When installed following the guidelines contained in this manual, the AccuLoad should

provide many years of safe, accurate, and reliable use.

This manual addresses the requirements specific to the AccuLoad IV and it is assumed that the installation

designers and fabricators are familiar with the applicable industrial facility construction standards specific to

the particular facility. The ST and QT models are designed for use in Class 1, Division 1 and Zone 1

hazardous locations, while the N4 and SA models are designed for North American Class 1, Division 2

environments only. If questions arise, please contact our Field Service Response Center or Customer

Support.

1.1 Product Description

The AccuLoad provides accurate, reliable control and measurement of liquid petroleum blending and

transfer operations. While primarily intended for use in refined petroleum distribution terminals, it can be

easily configured for a wide variety of liquid transfer applications.

Operators can select an amount of product to transfer and the AccuLoad monitors and controls the

configured pumps, valves, and additive injectors to safely and efficiently transfer the precise recipe and

amount. During the transfer, all processing parameters are monitored to provide operators with an

accurate amount of each component of the recipe delivered.

In addition to real-time control of the loading process, the AccuLoad also calculates averages and live

quantities of all products and additives delivered. This information is stored in a runtime database that can

be monitored by a supervisory host system. Whenever a transaction is completed, the AccuLoad stores a

detailed record in an internal transaction log for subsequent retrieval or printing.

1.1.1 AccuLoad IV Models

The AccuLoad IV is available in several hardware configurations and with multiple standard and optional

modules.

1.1.1.1 AccuLoad IV ST

The Single Touch Screen (ST) model

has the following specifications:

•

Explosion-proof enclosure

•

Two-arm operation

•

Up to four single- or dual-pulse product meter inputs

•

Up to four additive meter inputs or, with the optional A4I module, up to 24 additive meter inputs

•

AccuLoad III to IV upgrade kit (UG3)

Содержание Smith Meter AccuLoad IV









































































Результаты поиска

Содержание Smith Meter AccuLoad IV

Отзывы:

Бренды по названию

Популярные бренды

TechnipFMC Smith Meter AccuLoad IV, Инструкция по установке и обслуживанию

Результаты поиска

Содержание Smith Meter AccuLoad IV

Отзывы:

Бренды по названию

Популярные бренды