2
Phone: (800) 597-3921 or (317) 803-8000 • Fax: (317) 803-8001
The Model 00500 and the Model 00600 have been constructed using the latest technology and are
extremely safe and easy to operate. Despite that, there is still some danger if these units are operated
incorrectly and/or by untrained personnel.
Pay particular attention to the following Cautions and Warnings marked with the “Attention” and “Danger”
symbols. Failure to follow safe operating practices may cause injuries, death, or damage to the machine,
and may void your manufacturers’ warranties.
• Before attempting to use the unit you must have
read and fully understood this Owners Manual.
Keep this Owners Manual within easy reach of
operating personnel.
• Visually inspect the unit, power cord, and
accessory items for any signs of wear or
damage before operating the unit. Do not use
the unit if there is any sign of damage, or if the
unit is not performing normally.
• Never operate the machine without the correct
induction stop ring in place on the induction
head. Do not allow any part of the induction
head to contact the toolholder or cutting tool
during operation or damage to the machine may
occur.
• Do not wear rings, bracelets, or other metallic
objects while operating the machine. Metallic
objects may heat up very quickly when near the
induction head during operation.
• Use the provided thermal insulated glove
whenever handling tools or toolholders. Never
try to handle hot tools or toolholders until the
cooling cycle is complete.
• If the machine is moved from a cold environment
to a warm one, wait two hours before operating
to prevent condensation build-up from causing
electronic system errors.
• Persons with heart pacemakers may not
operate the machine, and must maintain a
minimum safe distance of 6 feet (2 meters)
from the machine at all times.
• Cutting tools have sharp edges. Handle with
caution.
• Operating the unit while improperly connected
or at the wrong voltage may damage the unit
and could possibly cause death or injury.
• Position the power cord so it cannot be damaged
by fork trucks or other equipment, or cause a
tripping hazard for personnel.
• Do not operate the machine in a wet environment
where exposure to coolant or spills are likely
to occur. Electric shocks or damage to the
machine may occur.
• Never operate the machine around flammable
materials, or fumes. Do not use flammable
liquids or aerosols to clean toolholders. Never
expose the machine or hot tools to combustible
materials.
• Never open the machine or attempt repairs
or you will VOID the manufacturer’s warranty.
Dangerous residual voltage is inside that may
cause death or injury.
• Unauthorized modifications or changes
to the ShrinkPRO machine will VOID your
manufacturer’s warranty. Do not try and service
your unit yourself. Techniks can provide any
necessary repairs or maintenance. Do not
modify or disable the built-in safety features of
the machine.
• Turn off the power switch and disconnect the
power cord from the outlet before cleaning,
servicing, or storing the unit.
Make sure you read, understand and follow these Cautions and Warnings, as well as the complete technical notes,
setup and operation instructions before installing and using your machine.
IMPORTANT - CAUTIONS & WARNINGS
Содержание 00500 ShrinkPRO Quencher
