Technica Engineering CM CAN Combo, Руководство пользователя, Страница: 37 / 70

CM CAN Combo

User Manual
37
Port : Please select the port, to which the filter will be applied:
CANA to CANF
Action :
Here you can define, which filter you want to use:
Drop : if you want to drop specific frames
Mark : specific SPY-flag is set in TECMP-header
Change Channel ID : you can change the Channel ID in
TECMP header of specific frames
Control Message : If the filter condition is met then an
additional frame is sent with the field "Control Message ID"
specified in
Parameter box.
Multiple Log Interfaces : Here you can define for a specific CAN-ID the logging
port(s) independent from the standard logging port ( Output to from CAN-Port).
The CAN-ID is only logged on selected ports.
Parameter : Parameters are used in chosen Action: Control Message . It specifies the
Control Message ID.
And parameters are used in
Action: Change Channel ID as value for the new Channel
ID.
Multi Log Interfaces : Only available if Action: Multi Log Interfaces is chosen. Any
combination is possible:
BaseT1: Logging on 100BASE-T1 port
BaseT1: No logging on 100BASE-T1 port
GB_A: Logging on GB-A port
GB_A: No logging on GB-A port
Field :
Here you can define, what you want to filter:
Field : no specific value, it has to be changed
CAN Id : here you can define which CAN_Id the filter has affect to
(XXX [hex], e.g. 12f)
Payload : Here you can define which payload of a CAN-message the filter has
affect to
Value :
Here you define the value of your Field . Allowed values depend on the chosen Field .
How to use Advance Filter:
Please see C
HAPTER
4.9