CM CAN Combo
User Manual
33
If 99% (Limit two) of the internal memory is full, because of the average input is
higher as the average output, the CaptureModule stops capturing. As soon as
the memory is emptied (less than 10% of capacity), the Capture module will
start capturing again. During this emptying process the CM Flag (Probeflag)
“Capture Module overflow” will be set
to “1”
. And there is a hint in red text on
the website of the CaptureModule.
If any of the events gets true, stored data is send with maximum bandwidth, so
please activate
traffic shaping
if needed to avoid data loss (see
C
HAPTER
4.5.1.7
Filters Table
Figure 4-16: Overview Filters Table
The
Filters Table
shows an overview about the basic filters (in current picture no filter
shown). These basic filters can be edited by the button
Edit Table
.
The button
Edit Advance Filter
opens an editable list of Advance Filter.