TECHFASS 53431000, Руководство пользователя

Страница: 13 / 20

Page 13
5.5 Setting parameters of the terminal
5.5.1 Operational parameters
O
pe
rati
on
a
l p
aram
ete
rs
Parameter Possible range Default setting
Door lock release time
0

255 s
7 s
Door lock control setting Direct / reverse Direct
Door lock relay function setting Standard / toggle Standard
Permanent door lock release according
to a time schedule
Never / Schedule index Never
Door lock status indication YES / NO NO
Acoustic signal of door lock release YES / NO YES
Door ajar time
0

255 s
20 s
First input configuration Door contact / REX button Door contact
Second input configuration
REX button / handle contact /
external / disabling function
REX button
Acoustic signalization time - tamper
0

255 s
30 s
Acoustic signalization time - forced door 0

255 s 30 s
Acoustic signalization time
– door ajar
0

255 s
0 s
Automatic summer time adjustment YES / NO YES
Module advanced function YES / NO NO
Release lock with REX button while
tamper alarm active
YES / NO YES
Saving events in
the module’s
archive
Door opened Enabled / Disabled Enabled
Door closed Enabled / Disabled Enabled
Input 2 On Enabled / Disabled Enabled
Input 2 Off Enabled / Disabled Enabled
Strike released Enabled / Disabled Enabled
Strike closed Enabled / Disabled Enabled
Table 15: Operational parameters
5.5.2 Operational parameters setting
Detailed instructions for setting terminal operational parameters are described in the APS
Reader
configuration program user’s guide available at the address
http://www.techfass.cz/files/m_aps_miniplus_reader_en.pdf .
5.5.3 Display parameters setting
Detailed instructions for setting the display parameters are described in the individual
configuration program
MDEM 31 Configuration Tool
user’s guide available at the address
http://www.techfass.cz/files/m_aps_miniplus_mdem31cfg_en.pdf .