Page 12
5.4.4 Changing the password
A change of the
password
is available after choosing the option
3 Set password
. You can
use any alphanumerical string as a password, it can contain up to 9 characters. A blank
password is not allowed. The password is saved by pressing the
Enter
key.
If a password is lost, the only solution to enable accessing the settings menu is resetting
the terminal to its factory defaults.
5.4.5 Changing subnet mask
You can change the
subnet mask
by selecting
4 Set IP subnet mask
. A new subnet mask is
entered by single bytes separated by the
Enter
key. If the entered value is not allowed, the
subnet mask is not changed. After inserting all of the address bytes the
final subnet mask
is
displayed and you are returned back to the main menu.
5.4.6 Changing gateway IP address
You can change the
gateway IP adress
by selecting
5 Set gateway IP
. A new address is
entered by single bytes separated by the
Enter
key. If the entered value is out of allowed
range, the byte is not changed. After inserting all of the address bytes the
final IP address
is
displayed and you are returned back to the main menu.
5.4.7 Saving the settings
To
save the settings
choose the option
9 Save & Exit
. If you
do not want to save
the
parameters, exit the settings menu by choosing
8 Exit without saving
.
