TECHCON TS980, Руководство пользователя

Страница: 13 / 65

Step 11:
•
The setup is now complete.
Proceed to next section 4.3 to
perform the nozzle calibration
process.
Step 9:
•
Connect the valve cables to the
controller. Sensor cable (6-to-5
pins) to the ‘SENSOR’ port
(11); Actuator cable (3-to-2
pins) to the ‘ACTUATOR’
port (12).
Caution : After
connecting, tighten the locking
sleeve
to secure the
connection.
•
Connect the provided external
power supply to the ‘DC-IN’
port (13).
Step 10:
•
Connect the first ø4mm OD air
tubing from the air pressure
source to the ‘IN’ port (14).
Caution: This air source must
be regulated and filtered
(dry) separated from the air
pressure source for the material
syringe or reservoir.
•
Connect the second ø4mm OD
air tubing from the ‘OUT’ port
(15) to the air fitting on top of
the Jet Valve (16).
•
Turn up the air pressure for
cooling to the maximum of 10
psi.
techcon.com/contact-us
13
Jet Valve Dispensing System User Guide
TS9800 & TS980