ST – 480
III.a.7).
III.b.10) Weather program
(weather control) (Setting as for the
main valve – see Section III.a.8).
III.b.11) Return protection
- (Setting as for the main valve – see
Section III.a.9).
III.b.12) Additional sensors
When two mixing valves are used and you select this function you will be
able to select the sensors from which temperature data are to be retrieved for a
valve (for return and outside temperature sensors). Temperatures can be
retrieved from the sensors of the valve being set (
Own
) or as per the controller
sensors (
Main controller
).
III.b.13) Room thermostat reduction
(Setting as for the main
valve – see Section III.a.10).
III.b.14) External sensor adjustment
The external sensor is to be adjusted during installation or after prolonged
use of the thermostat if the outside temperature displayed deviates from the
actual one. Adjustment range: -10 to +10
O
C with an accuracy of 1
O
C
III.b.15) Factory settings
(Settings as for the main valve – see Section
III.a.12)
III.b.16) Valve removal
This function is used to completely remove a valve from the controller
memory.
Valve removal
is used for example when removing or replacing a
module (the new module requires to be registered again).
- 20 -
