Tecfluid Converter XL1, Инструкция по эксплуатации

Страница: 11 / 40

11
With thermally insulated pipes DO NOT insulate the sensor. High temperatures can damage
it.
The maximum liquid temperatures are shown on page 32.
5 MOUNTING
5.1 Pipe adaptor mounting
The sensor is normally supplied mounted in its pipe adaptor. Before welding the adaptor to
the pipe, the sensor must be removed to avoid irreparable damage due to excessive
temperatures.
There are two basic types of pipe adaptors: with threaded or with flanged connection.
For the smallest pipe diameters (DN40, 50 & 65) the pipe adaptor is supplied welded to a
short length of pipe with a “T” form. For this type just couple it to the pipe by welding or
gluing in the case of PVC, PP, PE or other plastics.