Tecfluid Converter XL1, Инструкция по эксплуатации

Страница: 30 / 40

30
From this moment, the XL1 converter already has the new version of Firmware.
7.10 Configuration file
A device configuration backup can be made by saving data into a file. To do this, go to menu
“File” - “Save file”.
Progress bar will indicate the process, after which the message “Device programmed” will
appear.
The file is saved in the same folder where the Winsmeter XL1 software is located.
In the same way, a configuration data file can be loaded into the device. To do this, go to the
menu “File” - “Load file”, and the file explorer will appear. The file has to be searched there.
The filename is the serial number and the extension is INI.
Once the file is selected, press the “Program” button. A message “Programming device” will
appear.