Tecfluid Converter XL1, Инструкция по эксплуатации

Страница: 31 / 40

31
NOTE: When the configuration is saved into a file, the stored data are those in the device
memory. These data may be different from those shown on the Winsmeter program. To ensure
that the data match press the "Send" button in the "Programming" tab.
IMPORTANT: The USB connection is used only for the configuration and commissioning of
the device. In no case it is intended to be used continuously, as a normal mode of operation
in an industrial environment.
8 MAINTENANCE
It is recommended to clean the electrodes in installations where incrustations or appreciable
sedimentations can occur.
Cleaning can be done using liquid detergents and medium hard brushes.