Tecell Elektronik HC-200 Hyperview, Руководство пользователя

Страница: 14 / 26

oben
Button 1
T 2
T 3
T 4
Turn on the camera:
Plug the power cord into the camera.
Plug the other side of the power cord into the 12V DC cigarette socket.
(Camera do not operate with 24V DC!)
When the camera power supply is quickly increased by more than 1V, the camera
automatically turns on. (Camera detects the fast rise of voltage!)
After power On, the camera starts in normal mode saying “Normal recording" and it
continuously takes 1 min. long video pairs (channel L and R).
You can now e.g .:
- Press the button1 (T1) or key 3 (T3), then "Manual recording" is triggered.
- Press T3 and hold to switch to “Parking mode” or back to “normal mode”.
- Short-Press T2, so that the microphone is switched on/off.
- Long-Press T2, so the voice announcements are turned off/on.
- Long-press T4 to begin formatting the memory card. Short-press T4 button again to confirm
the formatting process, or press any other key to not to begin formatting.
With the command "Save normal = 0;" in “Driving mode” you can disable permanent
recording. Then camera records 1 video only when video recording is activated manually by
pressing the button 1 or 3 or when G-sensor activates video recording.
With the command "normal save = 1;" you can activate the function "Permanent Recording"
in driving mode again.
When you take completely new camera into operation, check that the internal battery is
charged! Turn the camera on and after about 10 seconds, unplug the power cord out of the
camera. If the battery is charged, then you can hear the camera voice telling: "Unstable
power supply. Camera turns off. If you don’t hear this message, charge the camera by using
it for about 30 Min. After approx. 30 min., internal battery should be enough charged to
allow camera to complete actual video and say that it turns off because of instable power
supply.
When internal battery is empty or damaged and power supply is interrupted, camera can
not properly complete last recorded video. Such videos are not playable in video players, but
you can recover such videos with HyperviewCam Video Player.
9 Operation