Tecell Elektronik HC-200 Hyperview, Руководство пользователя

Страница: 12 / 26

Example for the setting of:
Volume, G-sensor sensitivity, date and time and
the broader video on the video output jack.
In a text editor program write following commands and parameters. (see example)
(Filecoding: ANSI, Filename: tnn_config.txt, Directory: root of microSD-Card)
Save the commands in a txt file named: "tnn_config.txt" into the root directory on the microSD memory card.
Insert the memory card into the camera and turn on the camera.
Each time, when camera power on, it looks after "tnn_config.txt" file in the root directory of the memory card.
If tnn_config.txt file present, camera executes existing commands and then deletes tnn_config.txt" file.
Please note:
Do not forget at the end of each line to put the character "; "!
Misspelled commands are ignored by the camera.
The file "tnn_config.txt" is not deleted until all configuration commands have been executed.
It is not necessary to apply all existing commands each time. Use only those commands that you need.
"RTC" - command configures the date and time and is subject of automatical change. For example, when the camera's internal battery is
empty, the camera loses the set date and time. At next start of the camera, the camera automatically configures the date and time on the basis
of the last recorded videos in the memory card so the order of the videos, remain maintained based on the date and time.
Alternatively, you can use HyperviewcCam setting program, which creates "tnn_config.txt" file and saves it under C:.
(Install from attached MiniCD or download it from http: www.hyperviewcam.de)
7 Configuration of the Camera – manually