background image

In Player mode, can Videostitcher repair defective videos. See icon 1 and 2.

Repaired videos have no sound, but can be played normally and exported into one good stitched file.

For example, you use completely new camera and the internal battery is not charged or after long time internal battery no more works. When 

suddenly power interrupt occur (engine turned off -> camera power supply is interrupted), camera is not able to properly close video before it 

turns off. Then last recorded video remains unusable.

Therefore, every time when user select directory with videos, player checks if videos in selected directory are ok. If not, defective videos are 

marked red and also icon 2 appears. If user select particular red video then also icon 1 appears.

After clicking the icon  

only selected video red pair will be repaired*.

After clicking the icon 

all red video pairs in directory will be repaired.*.

*) Repaired means: From red (faulty) video pair (L and R video), an additional, blue (repaired) video pair is produced with the suffix "_fix" and 

stored in the same folder. The defective red video couple receives the suffix "_bad" and is no longer visible in the Player list. (is in Windows 

Explorer as "_bad.mp4" file visible). If there is no more space available on the disk for new videos, the application asks the user to define where 

repaired videos should be saved.

15 VideoStitcher: Recovery of defective videos

1 2

Содержание HC-200 Hyperview



























Отзывы: