1) Driving mode:
After switching on, the camera is in driving mode. In this mode, the function "Permanent Record"
is activated: This is the default setting. Also after the execution of command "normal save: 1;"
the camera takes continuously 1 min. long videos on (left and right video).
After execution of the command "Save normal: 0;“ then video recording of (-30 to +15 sec.) videos is only activated
manually, by presing the button 1 or 3 or by G-sensor.
Videos are stored in the folder “normal”.
In Chapter 12 you can read about the maximum size of each folder.
For driving mode use command “gsensor”. For parking mode use command “gsensorp”. In driving mode mode vehicle
is more vibrating then when parked, therefore “gsensorp” values are more sensitive than “gsensor” values for driving
mode.
2) Parking mode:
Long-Press key 3 to change between Normal mode and Parking mode.
In parking mode, video recording will be triggered by:
- Motion: When image changes sufficiently rapid the camera detects motion and activates the recording of the video.
The motion sensitivity can be set by the command "motion = 2;“ [in range 1-3].
- Vibration: When the vehicle is vibrating, the G-sensor can, depending on the selected sensitivity, detect vibration,
then recording of video (-30 to +15 sec.) is activated. Sensitivity of the G sensor means "Gsensor: 3;" [in range 1-5].
Those videos are saved in the folder "parking".
For parking mode use command “gsensorp”. In parking mode vehicle is resting therefore “gsensorp” values are more
sensitive than “gsensor” values for driving mode.
a) Manual recording:
After pressing button 1 or 3, the camera saves a 45-second video, which started 30 seconds before pressing a button
and ends 15 seconds after the button is pressed.
The user can start "Manual Recording“at any time.
Those videos are saved in the folder "user".
b) Event Recording:
Is activated by G-sensor, when a vibration activates recording. The G-sensor has 5 sensitivity levels and can by changed
for example with "Gsensor: 1;".
Those videos are saved in the folder "event".
10 Camera modes
oben
Button 1
T 2
T 3
T 4
Содержание HC-200 Hyperview
Страница 26: ...www hyperviewcam com...