27
7)
Remove the wire ties that hold the table and gear chains.
8)
Each feeder is equipped with 3
leveling boards.
Your production paper will sit on top
of these boards.
The amount of boards required,
depends on your sheet size.
9)
Place your stack of papers on the
leveling boards. Make sure all corners
are squared and evenly stacked.
10)
Loosen the locking handle on the support guide rails. (both sides)
Move both rails inward, applying a small amount of pressure at the corner
of your production paper. Make sure the paper is squared with the rails,
secure with the locking handles.
