44
DANGER: HIGH VOLTAGE AND CURRENT ARE USED TO ENGERGIZE THE UV
AND I.R. LAMPS. DO NOT LOOK DIRECTLY AT THE UV LIGHT, WEAR EYE
PROTECTION.
WARNING: THIS MACHINE HAS ROTATING ROLLERS AND CAN CAUSE
SERIOUS INJURY.
Note:
This shut down process is for equipment
with
or
without
Feeder control.
Please read carefully throughout this process understanding if the feeder
applies or does not apply to the process.
1)
Turn
OFF
Feeder Air Pump
2)
Set the Feeder and the I.R. intensity
controls to zero (0) setting.
3)
Turn
OFF
the UV Lamp.
Note:
The I.R. Lamp will automatically
shut
OFF
.
The UV Lamp will go into the cool down
cycle. It takes 5 minutes to cool down.
Then the blower will automatically shut off.
SECTION 13.0 SHUT DOWN PROCESS
