15
A.
Read and understand all safety warning decals.
B.
Check for damages caused by shipping – report damages to shipping carrier and your
dealer.
C.
Carefully uncrate your system. A forklift is required.
D.
Check and ensure that all sheet metal bolts are not loosened from transport vibration.
Use proper tools for tightening.
E.
Electrical power is ready for hook-up; refer to Section 4.0 - 4.2
F.
Make sure your work area is clean and ready for set-up.
(Table is not required when using an auto feeder:
Refer to section 6.5
)
1)
Set the feed table into
position as shown.
2)
Under the feed table
secure with 4pc thumb screws.
SECTION 6.0 PRE SET-UP
SECTION 6.1 FEED TABLE
