ecolight 708504, Руководство пользователя

Страница: 1 / 10

- 1 -
Diffuser
Diffuseur
Difusor
Switch
Interrupteur
Interruptor
Model/Model/Modelo #:
UC1040-BR2-14LF4-E,
UC1040-BR2-22LF6-E
LED CONVERTIBLE UNDER CABINET BAR
(Page 1)
RAMPE D’ÉCLAIRAGE À DEL CONVERTIBLE
À INSTALLER SOUS UNE ARMOIRE
(Page 4)
BARRA CONVERTIBLE CON LED
PARA DEBAJO DEL GABINETE
(Página 8)
To Begin/Pour commencer/Para comenzar
WARNING: Please read this entire manual before installation.
Verify the following contents:
AVERTISSEMENT : Veuillez lire ce mode d'emploi du début à la fin avant
de commencer l'installation. Vérifiez le contenu suivant :
ADVERTENCIA: Por favor, lea este manual completo antes de realizar la
instalación. Verifique el siguiente contenido:
Power cord
Cordon d’alimentation
Cable de alimentación
Linking cord
Cordon de
raccordement
Cable de conexión
Hardware Kit (Actual hardware may differ from illustration).
Trousse de quincaillerie (La quincaillerie incluse peut être différente de l’illustration.)
Kit de aditamentos (Los aditamentos reales pueden diferir de los que se muestran en la ilustración.)
Required/Nécessaire/Se necesita
Safety glasses
Lunettes de sécurité
Gafas de seguridad
Flathead screwdriver
Tournevis à tête plate
Destornillador de cabeza plana
Phillips screwdriver
Tournevis cruciforme
Destornillador Phillips
Installation time: 45 minutes
Temps d’installation : 45 minutes
Tiempo de instalación: 45 minutos
Drill bits 1/16 in.
Forets de 1/16 po
Brocas para taladro de 1/16 pulg
Electrical tape
Ruban isolant
Cinta aislante
Drill
Perceuse
Taladro
Pliers
Pinces
Pinzas
Wire cutters
Coupe-fil
Pinzas cortacables
Wire strippers
Pinces à dénuder
Pinzas pelacables
English
Warnings and Cautions
WARNING
• Shut off power at the circuit breaker or fuse panel before removing the
old fixture or installing the new one.
• LEDs can be damaged by electrostatic discharge (ESD) shock. Before
installation, discharge yourself by touching a grounded bare metal
surface to remove this hazard. To avoid damage, do not remove the
clear lens over the LED module.
CAUTION
• This device complies with Part 15 of the FCC rules. Operation is subject
to the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Wire coupling
Coupleur de fils
Acoplamiento
de cable