background image

LFSPOT

2X 3W LED TWINSPOT EMERGENCY 

FLOODLIGHT

POWERED BY LiFePO

4

WER TECHNOLOGY

with BUILT-IN SENTINEL

THE BARDIC WARRANTY

Our goods come with guarantees that cannot be excluded under 

the Australian Consumer Law. You are entitled to a replacement 

or refund for a major failure and for compensation for any other 

reasonably foreseeable loss or damage. You are also entitled to have 

the goods repaired or replaced if the goods fail to be of acceptable 

quality and the failure does not amount to a major failure.

If the BARDIC emergency lighting fitting (the unit) is found to be 

defective due to faulty workmanship or faulty materials used in 

its manufacture (but excluding defects due to neglect, misuse or 

abuse of the unit by any person) within twelve months of the date of 

purchase, it will be repaired free of charge (except the fluorescent 

tube and/or the incandescent globe which are not covered by this 

warranty) or, at the sole discretion of the manufacturer, replaced. In 

either case, return to the purchaser, freight paid.

Any faulty unit should be forwarded FIS to the point of purchase, 

accompanied by the sales voucher to establish the date of purchase.

The unit must be clearly marked with the name and address of 

the purchaser and the nature of the fault. If the sales voucher is 

unavailable at the time of claim, the warranty will be deemed to have 

commenced from the packaging date as indicated by the unit date 

stamp.

All warranty claims on the unit in question must be received by the 

distributor within the 24 month warranty period. This warranty does 

not apply to any unit which is situated outside of Australia.

This warranty is in addition to all other warranties rights and remedies 

implied by or available under any laws in force in Australia. Any civil 

liability of the manufacturer howsoever arising shall insofar as the 

same may be legally done be limited at the manufacturer’s option as 

follows:

a. 

Any liability for breach of warranty, subject to the said limitations, 

is limited in a case of goods to any one or more of the following 

(as selected by the manufacturer): 

(i) 

The replacement of the goods or the supply of equivalent  

 

goods; or 

(ii) 

The repair of the goods; or 

(iii) 

The payment of the cost of replacing the goods or  

 

requiring equivalent goods; or 

(iv) 

The payment of the cost of having the goods repaired

b. 

And in the case of services such liability shall be limited to any 

one of the following (as selected by the manufacturer) 

(i) 

The supplying of the services again; 

(ii) 

The payment of the cost of acquiring those services  

 

again; The manufacturer shall not be liable for any  

 

indirect or consequential loss however and whatsoever  

 arising.

MPower manufactures a range of emergency lighting fittings without 

integral batteries (commonly termed as Slaves), for operation in 

conjunction with central power supplies.

MPower will not be responsible for any damages to slave units as a 

result of connection to central power supplies operating outside the 

voltage parameters specified for these slave units.

Installation - Maintenance

Testing Instructions 

and Warranty

MAINTENANCE RECORD

OWNER: __________________________________________________

ADDRESS: _________________________________________________

INSTALLATION DATE: _____________   LOCATION: ________________

SIX MONTHS CHECK

DATE

LIGHT TEST

LED TEST

LAMP CHECK

TESTER

Yellow LED Indicator 

Description

Green LED and Yellow LED ON

Normal mode of operation

Battery on charge and luminaire 

passed its last test

Green LED and Yellow LED OFF

Emergency Luminaire on Test.

Mains Power OFF

Green LED Permanently ON, Yellow 

LED Flashing 4sec ON, 1sec OFF

Within the last 5 days, the emergency 

luminaire passed its test.

Green LED Permanently ON, Yellow 

LED flashing continuously

Emergency luminaire failed its last test 

and requires attention.

Green LED Permanently ON, Yellow 

LED flashing continuously for 5 secs

The Manual Test command is 

acknowledged, the test will start imme-

diately battery is fully charged.

The Green LED, when illuminated indicates that the battery is charging.

The Green LED when OFF, indicates that the AC supply is OFF, or the emergen-

cy light is running a sentinel test.

The Yellow LED indicates that the Sentinel feature has been activated and the 

LED is normally illuminated except during periods of test and mains failure.

Table showing Sentinel Indicator States

Отзывы: