21
1.
Enter User Mode by pressing and holding the Menu button for 3 seconds.
2.
Press EXE and then use the Menu button to navigate to the Cleaning sub-menu. See User
Mode Menu Map in Appendix C for navigation assistance.
3.
Open the card feeder door and remove any blank cards.
4.
Remove the protective paper backing from both sides of the cleaning card.
5.
Insert the Cleaning Card into the feed gate until the card stops.
6.
Press the EXE button to begin the cleaning process.
7.
Remove the card when the process is completed and discard.
Figure 3-1: Entering User Mode
Figure 3-2: Remove protective backing
Figure 3-3: Insert cleaning card