Remote Control Unit
The included remote control unit allows the unit to be operated
from a distance.
When using the remote control, point it towards the remote
sensor on the front of the unit.
• Even if the remote control is used within its effective
operation range (5 m), the unit might not respond to the
remote if there are any obstacles between them.
• The remote control might function incorrectly if it is
operated near other products that generate infrared rays
or if other remote control devices that use infrared rays are
operated near the unit. Likewise, the other products might
also function incorrectly.
Battery Installation
1
2
3
1
Remove the battery compartment cover.
2
Put in the lithium battery (CR2025, 3V).
3
Close the cover.
Battery Replacement
If the distance required between the remote control unit and
main unit decreases, the battery is exhausted. In this case,
replace the battery with a new one.
• For information about the collection of batteries, please
contact your local municipality, your waste disposal service
or the place where you purchased them.
Battery Precautions
• Be sure to insert the batteries with correct positive “+” and
negative “ - ” polarities.
• Use batteries of the same type. Never use different types of
batteries together.
• Either rechargeable or non-rechargeable batteries can be
used. Refer to the precautions on their labels.
• When the remote control unit is not to be used for a long
time (more than a month), remove the battery from the
remote control unit to prevent it from leaking.
• If the batteries leak, wipe away the leakage inside the
battery compartment and replace the batteries with new
ones.
• Do not use any batteries other than those specified.
• Do not heat or disassemble batteries. Never throw them in
fire or water.
• Do not carry or store batteries with other metallic objects.
Doing so could cause batteries to short circuit, leak or
explode.
• Never recharge a battery unless it is confirmed to be a
rechargeable type.
