When the unit is switched to DAB mode for the first time, the
automatic tuning process will start and create a channel list.
(Autoscan local: 10A to 13F)
• After the first time, when the unit is switched to DAB mode,
the last station listened to will be tuned in again.
1
Press the FUNCTION button to select “DAB”.
• If you select "FM", press the BAND button to change to
"DAB".
When the scanning process has finished, the DLS (Dynamic
Label Segment) (page 23) appears on the second line of the
display.
• If no broadcast services are found, “No stations available” is
displayed and the unit will automatically enter manual tuning
mode (page 26).
2
Turn the TUNING knob to select the station you
want to listen to.
Listening to the DAB
3
When you find the channel, press the SELECT
button.
• If you do not press the SELECT button within 7 seconds, the
display will return to the currently tuned station.
• If you move the unit to a new area or you want to check
to see if there are new channels available in your area, you
can scan to find new channels automatically by using the
automatic scanning function.
Auto scan
You can scan DAB bands to find new channels.
Local scan: 10A to 13F
Press the AUTO SCAN button while DAB is selected as the
source.
Full scan: 5A to 13F
If you want to search stations internationally, press and hold
the AUTO SCAN button for longer than 2 seconds while DAB
is selected as the source. Try this if “Local Scan” does not
find the channels you want.
Hold down
more than
2sec
.
• You can also select and activate “Local scan” and “Full scan”
in the DAB function control menu (page 26).
How to delete the stored station
•
In standby mode, hold down the stop (
H
) button for
longer than 5 seconds and press the play / pause button
(
G
/
J
), all of setting system will be reset.
current tuning station
select the station you want to listen to
