If you have problems with your system, read this page and try to
solve the problem yourself before calling your dealer or a TEAC
service Center.
General
No power
Check the connection to the AC power supply. Check
whether or not the AC source is a switched socket. If it is,
confirm that the switch is turned on. Confirm that there is
power to the AC socket by plugging another item such as a
lamp or fan into it.
No sound from speakers.
Select the source by pressing the FUNCTION button.
Adjust the volume.
Remove the headphone plug from the PHONES jack.
If “MUTING” appears on the display, press the MUTING
button.
The sound is noisy.
The unit is too close to a TV or similar device. Relocate it
away from the interferring device or turn it off.
Remote control doesn’t work.
Press the STANDBY/ON button to turn the unit on.
If the battery is exhausted, replace it with a new one (see
page 5).
Use the remote control unit within the operation range (5 m)
and point it at the remote sensor on the front panel.
Remove obstacles between the remote control unit and the
main unit.
If a bright light is near the unit, turn it off.
iPod / iPhone Player
Cannot insert the iPod/iPhone.
Check the Dock Adapter (see page 11).
Remove dust or obstacles from the dock connectors of the
SR-3DAB and the iPod/iPhone, and insert the iPod/iPhone
again.
iPod will not play.
Remove the iPod/iPhone from the dock, wait a few seconds,
and insert it again.
A software update might solve the problem. Visit the Apple
website and download the latest iPod/iPhone software (see
page 11).
Cannot operate the iPod/iPhone.
Release the iPod/iPhone HOLD switch.
FM Tuner
Cannot listen to any station, or the signal is too weak.
Tune in a station properly.
Rotate the DAB/FM antenna until you receive a station
clearly.
DAB tuner
No sound.
Ensure that the unit has been able to locate a DAB station.
“NO STATIONS AVAILABLE” appears on the display.
Confirm that a DAB broadcast is available in your area.
Cannot access secondary services.
Not all services are accompanied by secondary services. If a
secondary service is available, the secondary indicator (“>>”)
is displayed next to the station name.
Display disappears or “service off air” displayed.
This may occur if a broadcaster changes the label of a service
or removes the label while you are listening to it. The unit
will try to retune the station. If the problem persists, follow
the procedure for automatic scanning on page 22.
Cannot listen to the selected station.
Confirm that you have pressed the SELECT button to listen
to a selection. The station you are currently listening to will
be displayed on the first line of the display, the second line
will show other station options as you scroll through the
station order list. Press the SELECT button to activate your
selection.
A burbling sound is heard on some stations.
A DAB system is able to produce quality audio from a
low level signal, but when the signal level is too low, a
“burbling” sound might be heard. To reduce this, try
repositioning your antenna to maximize signal reception.
CD Player
Cannot play.
Load a disc with the label side up.
If the disc is dirty, clean the surface of the disc.
A blank disc has been loaded. Load a prerecorded disc.
Depending on the disc, etc. it may not be possible to play
back CD-R/RW discs. Try again with another disc.
You cannot play back unfinalized CD-R/RW discs. Finalize
such a disc in a CD recorder and try again.
USB / SD Player
Cannot play.
MP3 files data might have been broken.
The files data format might not be a MP-3 format
The bit rate of the file might be more than 48 kHz.
If normal operation cannot be restored, unplug AC adapter
cord from the socket and plug it in again.
Troubleshooting
