SECTION 17: Getting Label Print Job Started
46
3. Correcting aspect ratio
1) Place a medium on the tray and click
next to
Aspect ratio
on the
Maintenance
tab.
2) The P-55 starts printing the first test pattern.
*The first test pattern is printed as shown on the
left.
3) Take out the medium from the disc tray. Then, with
the medium rotated counterclockwise by 90
degrees, place the medium back into the tray so
that the two black printed areas on the medium are
set toward the printer side and aligned horizontally
as shown by the arrows.
*Move the medium to the right as shown by the
red thin arrows to bring the hold pins located into
the center of the tray into contact with the left side
of the center spindle hole of the medium.
4) Click
Repeat
on the
Maintenance
tab.