SECTION 17: Getting Label Print Job Started
43
4) Place a print medium into the P-55 and click
next to
Positioning pattern
on the
Maintenance
tab.
5) The P-55 starts printing the first test pattern.
*The
first
test pattern is printed as shown on the
left.
6) Take out the medium from the tray. Then, with the
medium rotated by 180 degrees, place the
medium back into the tray so that the two black
printed areas on the medium are set toward the
printer side and aligned horizontally as shown by
the thick arrows.
*Move the medium to the right as shown by the
red thin arrows to bring the hold pins located in
the center of the tray into contact with the left side
of the center spindle hole of the medium so that
the hold pins and the black bars marked on the
medium are aligned vertically as shown.
7) Click
Repeat
on the
Maintenance
tab.
*The
second
test pattern is printed as shown on
the left.
