SECTION 12: Control Panel Features
17
1
Choosing between USB Port and Parallel Port
1. Make sure the LCD on the control panel displays Ready.
R
e a d y
2. Press
the
SELECT
button to set the mode to
6 Interface
.
6 I n t e
r f a c e
U S B
3. Press
the
ENTER
button to set the mode to
Select I/F
.
S
e L e c t I / F
U S B
4. Until the desired port, USB or parallel port, is displayed on the LCD, keep pressing the
SELECT
button.
S e l e c t I / F
U S B ( P a r a l l e l )
5. Press
the
ENTER
button to enable the port you have selected.
S e l e c t I / F
P
a
r a l l e l
6. After the message appears as shown, turn off the power using the
Power Switch
on the backside of
the printer.
P l e a s e S h u t D o w n
a n d R e s t a r t
7. After a second, press the
Power Switch
on the backside to turn on the power. Make sure the LCD
displays Ready. Then, the printer is ready.
R
e a d y
<--Press the
SELECT
button to switch between
USB
and
Parallel
.
<-- e.g. Parallel port selected