Teac ER-LXRC1000, Инструкция по эксплуатации

Страница: 25 / 40

25
8-3. SYSTEM
SAMPLING SERIES
Set the sampling frequency series.
SAMPLING FREQ.*
Set the sampling frequency.
SAMPLING BANDW.*
Set the sampling frequency bandwidth.
ATTENTION
The number of recording channels is limited accord-
ing to the sampling frequency. See the “Number of
channels that can be recorded simultaneously” in the
Specifications of the LX-1000 Instructions for Use.
DECIMATION FILTER
When using a low-speed sampling frequency series,
set whether or not to use a decimation filter to prevent
aliasing.
ON: Use.
OFF: Do not use. Aliasing will occur, but delay will not.
AD BITS
Set the analog-digital resolution (quantization bit depth).
VOICE MEMO
Set voice memo recording.
OFF: Not recorded
ON: Recorded
o
Voice memos are not recorded during the pre-
trigger interval.
o
When playing data recorded using the pre-trigger
function, the beginning of the voice memo will
be lined up with the recording data, so the voice
memo and recorded data playback positions will
be shifted by the amount of pre-trigger data.
ATTENTION
The maximum file size of voice memo data is 4 GB.
Voice memo data in excess of 4 GB will not be
recorded, but normal recording will not be interrupted.
(For voice memo data to exceed 4 GB, it would take
about 6 days.)
MONITOR CHANNEL
The signals of monitored channels are output from
the MONITOR OUT connector.
MONITOR RANGE
Set the monitoring output range.
SPEAKER OUTPUT
Select the signal output from the speaker.
SPEAKER LEVEL
Set the speaker volume.
* Select which is shown with the NOTATION setting (see
“8-6. MISC” on page 33).
8-3-1. TEDS
Selection position
Selection mark
This shows TEDS data for connected sensors.
On this screen, TEDS data from selected channels can
be manually loaded at once.
o
On the MODULE SETTINGS page (page 26), TEDS
data can be manually loaded for individual channels.
1
Turn the VALUE dial to change the selection,
and press the ENTER button to change channel
selection.
Channels shown with white squares are selected.
8. Settings